SPI input delay mode configuration
| DIN0_MODE | the input signals are delayed by SPI module clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the spi_clk. Can be configured in CONF state. |
| DIN1_MODE | the input signals are delayed by SPI module clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the spi_clk. Can be configured in CONF state. |
| DIN2_MODE | the input signals are delayed by SPI module clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the spi_clk. Can be configured in CONF state. |
| DIN3_MODE | the input signals are delayed by SPI module clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the spi_clk. Can be configured in CONF state. |
| DIN4_MODE | the input signals are delayed by SPI module clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the spi_clk. Can be configured in CONF state. |
| DIN5_MODE | the input signals are delayed by SPI module clock cycles, 0: input without delayed, 1: input at the (SPI_DIN5_NUM+1)th falling edge of clk_spi_mst,2 input at the (SPI_DIN5_NUM+1)th rising edge of clk_hclk plus one clk_spi_mst rising edge cycle, 3: input at the (SPI_DIN5_NUM+1)th rising edge of clk_hclk plus one clk_spi_mst falling edge cycle. Can be configured in CONF state. |
| DIN6_MODE | the input signals are delayed by SPI module clock cycles, 0: input without delayed, 1: input at the (SPI_DIN6_NUM+1)th falling edge of clk_spi_mst,2 input at the (SPI_DIN6_NUM+1)th rising edge of clk_hclk plus one clk_spi_mst rising edge cycle, 3: input at the (SPI_DIN6_NUM+1)th rising edge of clk_hclk plus one clk_spi_mst falling edge cycle. Can be configured in CONF state. |
| DIN7_MODE | the input signals are delayed by SPI module clock cycles, 0: input without delayed, 1: input at the (SPI_DIN7_NUM+1)th falling edge of clk_spi_mst,2 input at the (SPI_DIN7_NUM+1)th rising edge of clk_hclk plus one clk_spi_mst rising edge cycle, 3: input at the (SPI_DIN7_NUM+1)th rising edge of clk_hclk plus one clk_spi_mst falling edge cycle. Can be configured in CONF state. |
| TIMING_HCLK_ACTIVE | 1:enable hclk in SPI input timing module. 0: disable it. Can be configured in CONF state. |